FLOOD-GARD™

FLOOD-GARD™ Bearing Isolators for Fully Flooded Applications

FLOOD-GARD™ bearing isolators offer the ultimate sealing solution for aggressive, flooded lubrication environments. With its patent-pending IP66 design,

 

FLOOD-GARD™ is a revolutionary seal that combines improved safety and overall process efficiency with cost savings through extended equipment and bearing life.

BENEFITS

  •  Patented seal design provides bearing protection even in the most challenging flooded environments, extending the life of rotating equipment

  • Rugged, unitized construction for ease of installation

  • IP66 in most common design configurations

  • Available in standard and small cross-section configurations

  • Substantially reduced installation time - NO ARBOR PRESS NEEDED

  • No metal-to-metal contact between stator and rotor

  • Handles up to .015" of misalignment

TYPICAL APPLICATION

  • Rotating equipment such as pumps, motors, gearboxes with flooded internal lubricant levels (levels which are above the bottom of the shaft)

DESIGN PARAMETERS

  • Temperature: -22ºF (-30ºC) to 400ºF (204ºC)

  • Shaft to bore misalignment: ±0.015” (0.38 mm)

  • Axial motion to ±0.010” (0.25 mm)

  • Surface speed: to 3,000 FPM Max. (15.24 m/s)

  • Pressure: 7 psi intenal pressure

GUARDIAN™

Eliminates the metal-to-metal contact between rotor and stator that causes vibration and misalignment which causes traditional O-rings to shred

GUARDIAN™ bearing isolators offer exceptional bearing protection for pumps, motors, and bearing supported industrial equipment under the harshest conditions.

  •  GUARDIAN™ bearing isolators product selector and part lookup.

 

Garlock is pleased to announce the offering of the GUARDIAN™ bearing isolator in additional sizes of 12 to 24 inches for your larger applications. We call it the GUARDIAN™ XL.  We offer 7 day lead times in order to assist you with your needs. 

GUARDIAN™ products are composed of a patented Cam-Lock design and patented unitizing ring. This unique design eliminates the metal-to-metal contact between rotor and stator that causes vibration and misalignment which causes traditional O-rings to shred.

 

FEATURES AND BENEFITS

  • Easy by hand installation — no need for an arbor press

  • Uses less energy than contact lip seals

  • Compliant with safety and industry manufacturing standards

  • Non-contact engineered labyrinth design reduces shaft drag

  • Lifetime bearing protection increases mean time between failure (MBTF)

  • Extended bearing life

  • Consistent sealing performance

  • Non-wearing components

  • Garlock’s patented Unitizing Ring eliminates metal to metal contact between stator and rotor.

  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 66 ratings

  • Non-wearing components mean seal properties are not degraded over time

  • Faster mean time to repair (MTTR) during rebuilds

  • Eliminates repairs for shaft grooving

  • Eliminates repairs for seal housings

SPECIFICATIONS

  • Surpasses IEEE 841-2001 Standards

  • IP 65-66 rating per NEMA MG 1-2003, see GUARDIAN™ configuration table in downloads

  • API 610 compliant bronze construction (standard)

  • 316 SS construction available upon request

CONFIGURATIONS

  • Flanged (Split and Solid)

  • Small Cross Section Flanged (Solid)- Fits in c/s as small as 0.188in. (4.76 mm)

  • Flangeless (Solid)- Does not extend past face of the housing

  • Narrow Width Flangeless (Solid)

  • Steam Turbine (Solid)

  • Step Shaft  (Split and Solid)- Custom designed for applications where the shaft has a step

  • Split Pillow Block Housings (Split and Solid)

  • Vertical (Solid)- Vertical design for top applications

  • Surface Mount (Split and Solid)- For electric motors with tight radial spaces

  • GUARDIAN™ XL  - Standard Flanged and Flangeless

ADDITIONAL INFORMATION

Garlock Patented Cam-Lock Design

The patented Cam-Lock design of the GUARDIAN™ provides excellent bore retention while allowing easy installation by hand, without the need for an arbor press. The interference fit of other designs require special tools for installation and may generate bronze shavings and result in bore scoring.

Unitizing Element

The patented unitizing element prevents the rotor and stator to contact. The unitizing element also prevents the components from separating during operations which could cause premature failure. The unitizing element is integrated into all KLOZURE metal isolator designs. 

MICRO-TEC® II Bearing Isolators

Metallic bearing isolator with micro-cellular filter

MICRO-TEC® II bearing isolators offer superior bearing protection when airborne dust, or other contamination is present.

 

The MICRO-TEC® II line of bearing isolators feature the same advantages as the GUARDIAN™ bearing isolators, with the additional support of a microcellular foam (air filter) to capture any airborne contamination. 

FEATURES AND BENEFITS

  • Easy by hand installation — no need for an arbor press

  • Uses less energy than contact lip seals

  • Compliant with safety and industry manufacturing standards

  • Non-contact engineered labyrinth design reduces shaft drag

  • Lifetime bearing protection increases mean time between failure (MBTF)

  • Extended bearing life

  • Consistent sealing performance

  • Non-wearing components

  • Garlock’s patented Unitizing Ring eliminates metal to metal contact between stator and rotor.

  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 66 ratings

  • Non-wearing components means seal properties are not degraded over time

  • Faster mean time to repair (MTTR) during rebuilds

  • Eliminates repairs for shaft grooving

  • Eliminates repairs for seal housings

SPECIFICATIONS

  • Internal closed cell, silicone based microcellular foam (air filter)

  • Surpasses IEEE 841-2001 Standards

  • IP 65-66 rating per NEMA MG 1-2003, see MICRO-TEC® II configuration table

  • API 610 compliant bronze construction (standard)

  • 316 SS construction available upon request

CONFIGURATIONS

  • Flanged (Split and Solid)

  • Small Cross Section Flanged (Solid)- Fits in c/s as small as 0.188in. (4.76 mm)

  • Flangeless (Solid)- Does not extend past face of housing

  • Narrow Width Flangeless (Solid)

  • Step Shaft  (Split and Solid)- Custom designed for applications where the shaft has a step

  • Split Pillow Block Housings (Split and Solid)

  • Vertical (Solid)- Vertical design for top applications

  • Surface Mount (Split and Solid)- For electric motors with tight radial spaces

ADDITIONAL INFORMATION

Garlock Patented Cam-Lock Design

The patented Cam-Lock design of the MICRO-TEC® II provides excellent bore retention while allowing easy installation by hand, without the need for an arbor press.

 

The interference fit of other designs require special tools for installation and may generate bronze shavings and result in bore scoring.

Unitizing Element

The patented unitizing element prevents the rotor and stator to contact. The unitizing element also prevents the components to separate during operations which could cause premature failure. The unitizing element is integrated into all KLOZURE metal isolator designs.

 

Microcellular Foam

The closed cell, silicone based foam used in the MICRO-TEC® II bearing isolators excels at excluding contamination. When looking to extend the service life of bearings in extremely harsh, dirty environments; the MICRO-TEC® II has been proven to outlast the others.

PUR-GARD™ Bearing Isolators

PUR-GARD™ bearing isolators offer the ultimate rotating equipment sealing solutions for the food processing industry. Manufactured with materials that are FDA compliant, metal detectable and x-ray inspectable while utilizing a patented IP66 design,

 

PUR-GARD™ is a revolutionary seal that combines improved safety and overall process purity with cost savings through extended equipment and bearing life.

FEATURES AND BENEFITS

  • Patented labyrinth design provides bearing protection even in the most challenging environments, extending the life of rotating equipment

  • Unitized construction will not come apart during installation 

  • IP66 in most common design configurations 

  • Non-contacting design reduces shaft drag and energy consumption 

  • Available in a broad range of configurations 

  • Substantially reduced installation time - NO ARBOR PRESS NEEDED 

  • No metal-to-metal contact 

  • Metal detectable and x-ray inspectable

TYPICAL APPLICATION 

  • Rotating equipment (pumps, motors, gearboxes) exposed to heavy wash down and/or zone 1 and 2 applications

DESIGN PARAMETERS 

  • Temperature: -22ºF (-30ºC) to 400ºF (204ºC) 

  • Shaft to bore misalignment: ±0.020” (0.51 mm) 

  • Axial motion to ±0.015” (0.38mm) 

  • Surface speed: to 12,000 FPM Max. (60.9 m/s) 

  • Pressure: Ambient 

  • Non-contact labyrinth seal design

PATENTED CAM-LOCK O-RING GROOVE DESIGN 

The patented Cam-Lock design of PUR-GARD™ provides excellent bore retention while allowing easy installation by hand, without the need for an arbor press.

MATERIALS OF CONSTRUCTION 

  • 316 stainless steel stator and rotor

  • Patented DETECTOMER® FKM o-rings

GARLOCK PATENTED UNITIZING RING 

PUR-GARD™ bearing isolators employ the patented unitizing ring to eliminate metal-to-metal contact between the rotor and stator. 

GARLOCK PATENTED UNITIZING RING 

PUR-GARD™ bearing isolators are offered in various configuration for a per

  • Flanged: IP66

  • Small Cross Section: IP66

  • Flangeless Narrow Width: IP55

  • Flangeless: IP55

  • Split Pillow Block: IP66

  • Step Shaft: IP66

  • Vertical: IP66

  • Split Option: IP66

SGi® Bearing Isolators

Shaft Grounded Isolator for VFD Controlled Electric Motors

The SGi® bearing isolators integrate the best features available for shaft grounding merged with supperior bearing protection. SGi® bearing isolators are the best solution for your electric motors. 

FEATURES AND BENEFITS

  • Uses less energy than contact lip seals

  • Compliant with safety and industry manufacturing standards

  • Non-contact engineered labyrinth design reduces shaft drag

  • Lifetime bearing protection increases mean time between failure (MBTF)

  • Extended bearing life

  • Consistent sealing performance

  • Non-wearing components

  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 66 ratings

  • Non-wearing components means seal properties are not degraded over time

  • Faster mean time to repair (MTTR) during rebuilds

  • Eliminates repairs for shaft grooving

  • Eliminates repairs for seal housings

SPECIFICATIONS

  • AEGIS® shaft grounding technology

  • Surpasses IEEE 841-2001 Standards

  • IP 65-66 rating per NEMA MG 1-2003, see SGi® configuration table

  • API 610 compliant bronze construction (standard)

CONFIGURATIONS

  • Flanged (Split and Solid)

  • Flangeless (Solid)- Does not extend past face of housing

  • Surface Mount (Split and Solid)- For electric motors with tight radial spaces

ADDITIONAL INFORMATION

Unitizing Element

The patented unitizing element prevents the rotor and stator to contact. The unitizing element also prevents the components to separate during operations which could cause premature failure. The unitizing element is integrated into all KLOZURE metal isolator designs. 

Shaft Grounding Technology

The AEGIS® shaft grounding technology allows the SGi® to handle stray electric currents found in your motor. Garlock has partnered with EST(Electro Static Technology) to provide the best electric protection with the best bearing protection in one seal, the SGi®.

Split GUARDIAN® Isolators

 

 

 

 

The first truly unitized split isolator, the Split GUARDIAN™ offers exceptional bearing protection for pumps and motors under the harshest condition. When uptime and mean time to repair (MTTR) are your primary concerns, the Split Isolator is your only real choice.

 

Rigging and maintenance is very costly, the Split GUARDIAN™ can save thousands of dollars in maintenance due to the unique split design. No more costly tear down of equipment required, with the Split GUARDIAN™, the average installation takes minutes instead of hours.

VALUE & BENEFITS

Lifetime bearing protection increases mean time between failure (MTBF)

  • Split GUARDIAN™ bearing isolators have a unitizing ring which keeps seal components from having metal to metal contact.

  • Extend bearing life by excluding contamination and retaining bearing lubrication to IP65 levels.

  • Non-wearing seal components provide consistent sealing performance over the lifetime of a bearing.

Split Design offers the fastest mean time to repair (MTTR) during rebuilds

  • Stationary o-ring contact between the seals and shaft eliminates shaft grooving damage

  • Stationary o-ring contact between the seal and housing eliminates housing damage

  • Reduce time to install without an arbor press with Garlock's patented Cam-Lock o-ring system.

  • Optional surface mounted design, for solid or split configurations, eliminates the need to machine equipment housings with small cross sections to accept a bore installed bearing isol

Non-contact engineered labyrinth designs reduce shaft drag, using 97% - 99% less energy vs. contact lip seals

Compliant with safety and industry manufacturing standards

  • Surpasses IEEE 841-2001 Standards

  • IP 65 rating per NEMA MG 1-2003, see each design configuration below for the specific rating

  • API 610 compliant bronze construction (standard), 316 SS construction available upon request

AVAILABILITY

  • Global Application Engineering Support

  • Expedited service available

TYPICAL APPLICATIONS

  • Pillow blocks

  • Electric motors

  • Pumps

  • Gearboxes

  • Food processing

  • Fans

  • Industrial Rotating equipment requiring lifetime bearing protection

ISO-GARD® 

Bearing Isolators

Exceptional bearing protection

ISO-GARD® bearing isolators offer exceptional bearing protection for pumps, motors, and bearing supported industrial equipment under the harshest conditions.

 

ISO-GARD® products are constructed using a filled PTFE material which provides excellent chemical resistance. 

FEATURES AND BENEFITS

  • Easy by-hand installation — no need for an arbor press

  • Uses less energy than contact lip seals

  • Compliant with safety and industry manufacturing standards

  • Non-contact engineered labyrinth design reduces shaft drag

  • Lifetime bearing protection increases mean time between failure (MBTF)

  • Extended bearing life

  • Consistent sealing performance

  • Non-wearing components

  • Engineered labyrinth designs exclude contamination while retaining bearing lubrication, to IP 55 ratings

  • Non-wearing components means seal properties are not degraded over time

  • Faster mean time to repair (MTTR) during rebuilds

  • Eliminates repairs for shaft grooving

  • Eliminates repairs for seal housings

SPECIFICATIONS

  • Surpasses IEEE 841-2001 Standards

  • The rotor and the stator are both manufactured with FDA compliant filled PTFE

  • FDA Fluoroelastomer O-rings 

  • Speeds up to 4,500 fpm (22.9 m/s)

  • Axial motion up to +/- 0.015in. (0.38 mm)

  • Radial misalignment up to +/- 0.020in. (0.51 mm)

CONFIGURATIONS

  • Flanged

  • Flangeless - Does not extend past face of housing

  • Grease Purge - Relief in seal allows regreasing with no disassembly of equipment

  • Small Cross Section - Fits in c/s as small as 0.188in. (4.76 mm)

  • Split Pillow Block Housings

  • Step Shaft - Custom designed for applications where the shaft has a step

  • Vertical - Vertical design for top applications

Krypton Bldg., M.C. Briones St., Highway Tipolo,

Mandaue City, Cebu, Philippines, 6014

(MON to FRI 8:30am to 5:30pm , SAT 8:30am to 4:00pm)

MANILA 

      Telefax (02) 584- 4336    

CEBU

Landline (032) 345-2383

                  (032) 420-7161 

      Mobile (0922) 850-6012 

   Telefax (032) 345-3374

 

MINDANAO

Landline (088) 567-0068

     Mobile (0922)-850-6010

                 

Get a Quote